Home
About MMI
Products
Product Categories
Holiday Special
New Products
Commission Package
Replacement Parts
Boat Maintenance
Clearance
Shopping Cart
 
My Account
Customer Care
Manufacturers
Consulting Center
Home » Products » Clearance » #166975
CENTEK 2.00" X 2.00" Vernalift (Fig 2) 10.00" X 10.00"
ITEM# : VER1500027W
Product Name : CENTEK 2.00" X 2.00" Vernalift (Fig 2) 10.00" X 10.00"
Category : Engine-Room Parts » Mufflers & Accessories
Model : 1500027W
Weight : 8.3 lbs
Now Only : $395.15 USD / EAC
Quantity :
0 EAC in your cart.
Temporarily out of stock.
Available within 7-10 business days if the item is in stock.
Usually dispatched within 1500027W

1. The VernaliftTM is a WET marine exhaust muffler
2. The VernaliftTM is designed for gas/water to flow in one direction only. Please note labels on muffler carefully.
3. Allow sufficient distance between the water injection point and the VernaliftTM to adequately cool the exhaust gases.
We recommend a minimum of two feet. Maximum operating temperature should not exceed 350° F. A typical welldesigned
system should run between 120-188° F.
4. If the exhaust manifold is near or below the waterline, a siphon break must be installed to prevent continued water
flow after engine shut down (see Figures 2 and 3).
5. The VernaliftTM should be installed at the lowest point of the exhaust system with the top of the muffler at least 12
inches below the manifold outlet. The possibility of reverse flow of water increases if installed at less than 12
inches. When space constraints do not allow for this height difference, it is strongly recommended that a riser
(gooseneck) be installed in the system (see Figure 3).
6. Install the VernaliftTM as close to the centerline of the engine as possible. This will minimize the possibility of cooling
water return to the engine in severe angles of heel in sailboats.
7. Making connections:
A) Use approved marine exhaust hose for all connections. This will help isolate the muffler and other
components from vibration. Do not connect other components to the muffler in a rigid fashion by using
adhesives and/or FRP reinforcements.
B) DO NOT coat hose or muffler with oil or grease – use water for lubrication.
C) Use a minimum of two stainless steel hose clamps per end connection. Tighten clamps by hand with a
screwdriver or small wrench. Do not use air wrenches.
8. Add a loop at the outlet side of the muffler that is 18” above the waterline. This may not be necessary for above
waterline installations.
9. The outlet hose should run continuously downhill for self-draining. A Centek VernatoneTM inline muffler can be
installed in this line for further silencing.
The VernaliftTM is recommended for both gasoline and diesel propulsion and generator engines. It is designed to
withstand many times the normal operating pressures. However, this does not mean that it can withstand the
extreme instantaneous pressures associated with back-fire.
WARNING! Should a back-fire occur, an immediate and thorough inspection of the entire exhaust system is
recommended.

The Vernalift was designed originally for small auxillary engines installed near or below the water line. Now the Vernalift family has expanded to inclue new and larger engines. If you have any questions or need help, contact us. Not sure what finish you need? Click here.

Application: Inboards, Sailboats & Generators
Fuel type: Gas/Diesel
Waterline: Above or Below
Sound rating: Better


 

Related Product (1/3)
NO PIC
Only $2,858.42 US
Only $151.86 US
NO PIC
Only $205.31 US
NO PIC
Only $417.62 US
NO PIC
Only $92.42 US
»

MMI Marine is your best source when you need replacement parts for Taiwan boats and other yacht replacement parts. Our vast selection of discount marine parts and accessories will help you rest assured that you are getting the finest quality parts at the best available pricing.

Our inventory includes more than 200,000 items, such as hardware, equipment, electrical components, safety gear, appliances, lighting, and more. We work with top brand manufacturers to make sure you are choosing from the very best in replacement parts for Taiwan boats, and shipments can be made from either our domestic division or our Taiwan-based operations.

Your yacht is your symbol of success and we understand that you only want the best when it comes to updating your systems or completing basic repairs. You can turn to us for everything from detailing chemicals to pumps, and even complete commission packages. Let us be your trusted one stop source for all the yacht replacement parts you need.

M.M.I.
894 W. 16th St.
NEWPORT BEACH, CA.92663, USA
TOLL FREE: 1-800-7473014
TEL: (949)631-0518
FAX: (949)631-0313
Email: info@mmimarine.com
Product offering and prices listed on this website (www.mmimarine.com) are limited to Internet orders and prices subject to change without notice.
We accept paypal, credit cards & wire transfer.
Acceptance Mark
| NEWS | CONTACT US | PRODUCTS | WARRANTY | PRIVACY POLICY |
© 2006-2024 MAGNA MARINE INC(DBA M.M.I.) All Rights Reserved